Our company specializes in manufacturing microshafts with outer diameters from 0.3mm to 5.0mm.
We carry out integrated production in-house, starting with cutting, polishing, heat treatment, and barrel production.
All of our employees value the perspective of not just making shafts, but creating finished products together with our customers.
Our mission is to stand in the same perspective as our customers, determine what is best for their needs, and propose an even better solution.
We believe that these thoughts and actions will ultimately lead to the creation of the best products and contribute to people around the world.
Currently, the environment surrounding us is undergoing major changes, and geopolitical risks are threatening us without warning.
We will continue to evolve and grow in order to respond to these changes with flexible thinking and provide better service and quality to our customers.
Conpany Name |
Tokyo Microshaft Corporation |
|---|---|
Address |
Lot 1 Block 4, Naga Valley Industrial Park, Special Economic Zone, Cantao-an, NagaCity 6037, Cebu Philippines |
CEO |
Tomoaki Maruyama |
Capital |
USD 50,000 |
| Site | 4,000㎡ |
| Certification Obtained | ISO14001, ISO9001 |
TEL |
(63)(32)272-7777 |
FAX |
(63)(32)272-7722 |
List of Major Products |
Computer parts, Connector pins, Microshaft, Micro motorshaft, Pin for insert molding, Rotary hinge components for mobile phones, Printer head parts, Connector of an automobile, Terminal pin for a watch. |
| 見出し | ここをクリックして表示したいテキストを入力してください。テキストは「右寄せ」「中央寄せ」「左寄せ」といった整列方向、「太字」「斜体」「下線」「取り消し線」、「文字サイズ」「文字色」「文字の背景色」など細かく編集することができます。 |
We deliver high-performance shafts from the Philippines to the world
It chamfers the coil material, it's diameter from 0.1mm to 3.0mm, in various angles.
It also makes grooves and forms complex shapes, such as a sphere and a cone in the tip of the shaft.
High-speed cutting machine will cut the coil material from 0.5mm up to 5.0mm outer diameter. These fast operating machines can efficiently cut coil to predetermined length efficiently.
This machine does a heat treatment to optimize the physical and mechanical properties of the material. This process involves heating and quenching of the items.
This is where the shafts from heat treatment were feed to correct the bend by passing it through the two cemented carbide rolls for issuing the straightness of the shaft.
The Grinder polishes the surface of the shaft with grinding stone, and smoothen its end surface while managing overall length dimension.
Knurling machine forms twill lines and makes streaks at the end of shaft.
This process is used for strengthening the power of the shaft not to be extracted from the main part.
This machine is used to shape the end face of a shaft into a spherical shape. Surfaces can be smoothed while edges are flattened and burrs removed to meet product specification requirements.
This is a polishing machine to keep the outer diameter, roundness, cylindricity and surface roughness of the shaft.
OQC (outgoing quality control) is the final step prior to shipping the products to our customers. This step makes sure that the product meets the specific requirements of our customers through inspection of its quality. All tests are carried out on the basis of the inspection criteria of customers. By being flexible to meet customer's requirements, we will provide you with better quality that our customer expects.
